TrueMatch RMC

TrueMatch RMC Specifications

Inputs 8/12/16/24 analog inputs, transformer-insulated, balanced (XLR/¼“ combo connector)
Meters precisely operating quasi-analog LED peak meters (31 segments each)
Synchronisation word-clock out (BNC), external-sync input (BNC)
Internal clock generator frequency accuracy better than ±10 ppm (as defined in AES 11, Grade 2)
PC interface serial PC interface, RS-232 (25-pole, D-Sub) and USB; on request RS-422
Sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz (version-dependent)
Group delay < 0.6 ms@48 KHz sample rate
Modulation noise (microphone inputs) typ. -155.5 dBFS CCIR-RMS
Modulation noise (line inputs) typ. -129 dBFS CCIR-RMS
THD+N (microphone inputs) typ. 0.003%@22 dBu input level, < 0.01% typ.@-50…+22 dBu
THD+N (line inputs) typ. 0.001%@22 dBu input level, < 0.02% typ.@-30…+22 dBu
Dynamic (microphone inputs) > 152.5 dB (A)@200 Ohm, > 159 dB (A)@0 Ohm
Dynamic (line inputs) typ. 133 dB (A)@0 Ohm
Frequency response (mic. inputs) 40…20,000 Hz ±0.1 dB
Frequency response (line inputs) 20…20,000 Hz ±0.05 dB
Input impedance > 10 kOhm (1 KHz)
CMR (microphone inputs) typ. 140 dB@50 Hz, 115 dB@1 KHz
CMR (line inputs) typ. 115 dB@100 Hz, 100 dB@1 KHz
Crosstalk attenuation > 100 dB@20…20,000 Hz
HF resistance HF-demodulation resistant according to IRT standards (Pflichtenheft 3/5) and European standards
Outputs 8/16/24 outputs (depending on the format option)
AES/EBU output professional/consumer formats (meeting EBU Rec. 3258, ANSI 4.40-1985, S/PDIF, and IEC 958); XLR male 1
ADAT output optical (TosLink)
MADI output MADI, compliant with AES 10-1991 (ANSI S4.43-1991), AES 10id-1995; BNC or SC (optical fibre)
Sony-SDIF2 output 25-pole D-Sub, female (on request)
Tascam-TDIF output 25-pole D-Sub, female
Y2/MEL2 output 25-pole D-Sub, female
Operating voltage 100…230 V AC
Power dissipation approx. 50 W
Dimensions

19'' module, 3 U (W x H x D: 482,6 x 132.5 x 450 mm)

If not otherwise indicated, the specifications refer to a 48-KHz sample rate and a level of 22 dBu; some specifications depend on the actual version.

wandlerkennlinie-diagonale xmad_fft1k-80 xmad_k_aabs28 xmad_wandler3