On Air 24 Console

Control & Remote Integration

Total Integration

The whole ON AIR 24 console is an integral part of the NEXUS TDM router system. All I/O sources, including router or mixing desk resources can be freely routed to any physical or virtual input or output. The NEXUS TDM bus allows simultaneous routing to unlimited multiple outputs free of additional latency.

Furthermore due to its unique TrueMatch© microphone card design no analogue pre-amps are required. Each microphone signal can be split in the card to provide 4 outputs, each with independent gain, lo-cut and limiter for connection to multiple consoles or other destinations.

Extra DSP is available as resources in the NEXUS: EQ, delay, gain, dynamics, crossfade, etc.

NEXUS Metering

Monitoring of all NEXUS I/O resources in 8 pages of up to 48 meters.

NEXUS DSP

Setup and recall of any gain, mix, delay, EQ, dynamics and others...

SAM 16

The STAGETEC Audio Monitor or SAM is a 19''/1U monitor panel interfacing to the XGUI software. It handles mono, stereo and surround signals with Spill, Solo and Mute functionality. 

Loudness Metering

STAGETEC now has an integrated loudness metering according to ITU-R BS.1770-2, ITU-R BS.1771 and EBU R-128 and a real time spectral analysis within NEXUS.

Loudness Metering
Three time scales are available: momentary (400ms), short-term (3s) and integrated with gating.
The measurement results can be directly fed into the meta data of the Dolby E® encoder boards (XDEE)

Master Monitor
The metering component is imple­mented as True Peak Metering in accordance with ITU-R BS 1770-2.

Realtime Spectral Analysis
Shows the spread of frequencies for the selected audio channels. 31 or 61 frequency bands are possible.

Future development: The Dante^TM interface card for NEXUS will provide multichannel audio over I/P.
For detailed information on Dante^TM please visit the Audinate webste: www.audinate.com
The Nexus interface card will be ready for the AVB (Audio Video Bridging Standard) once formalised. This will be achieved through a firmware update and the use of the AVB compliant network switching circuitry on the card.

STAGETEC is a founding member of the OCA Alliance formed between 9 Pro-Audio manufacturers.
The OCA control protocol will provide an open control platform between the product lines of the Mediagroup as well as 3rd party products and external schedulers.
For detailed information on the OCA standard please visit the website from the alliance: www.oca-alliance.com