sitemap downloads home contact E-mail
NEXUS Digital Audio Routing and Interconnect System Stagetec Home
sitemap
imprint
 
Concept
System
Features
Technology
Characteristics
Components
klick Base Device
klick System Boards
klick Control Computer
klick Digital-Audio
klick Analogue-Audio
klick DSPs & Controller
klick XDSP
klick XFAD
klick XJU
klick XCI
klick XRI
klick XTI
NEXUS Single-unit
Specifications
TrueMatch
References

Components

DSPs & Controller

 

 

 

pdf download
data sheet
(40 KB)

 


Jünger-website

Jünger Board

- Module board for accommodating 2 DSP modules made by Jünger Audio Studiotechnik GmbH -
Jünger Board

Features

  • 2 stereo inputs (4 channels) from the NEXUS bus
  • 2 stereo outputs (4 channels) to the NEXUS bus
  • 24-bit audio data
  • transparent transmission of additional data (C, U, V) from the input though to the output
  • Jünger-module settings are made from the graphical control program

 

 

 

Jünger Board

 

Version XJU-d05

The d05 digital signal processor was specially designed for digital dynamics processing of audio signals before broadcasting. The output level can be limited transparently without affecting the pre-emphasis usually applied to FM transmission systems.

  • increased signal density and loudness without side effects
  • complex program-controlled level algorithms
  • 4 program types: Universal, Classic, Pop, Speech
  • digital pre-emphasis filter (50 µs, 75 µs, or J.17)
  • digital audio compressor/limiter
  • audio-signal limiting without pre-emphasis affection
  • optimized modulation using Adaptive Spectral Processing
  • stereo or dual modes
  • controlled from NEXUS

Signal processing inside – NEXUS provides multiple alternatives for that: XJU processor board. The XJU board is available as version with no front panel; these board can be installed behind front panels of other 8-DU boards to save space.

Version XJU-mpx01

The digital limiter mpx01 ensures the audio-signal compliance to existing FM-transmission standards. The module board integrates a peak limiter and a modulation-energy limiter. The control processes are calculated based on the input audio signal. A new algorithm specially developed by Jünger Audio is employed for limiting the mpx power on the basis of the stereo signal. The output level of the mpx01 can be transparently limited with regard to the standard pre-emphasis applied to FM transmission systems. Thanks to the peak limiter and the Adaptive Spectral Processing, the unit provides for increased loudness for a multitude of pre-emphasis settings.

  • peak/modulation-energy limiter
  • program-dependent control algorithms
  • digital audio-limiter for FM transmission
  • audio-signal limiting without pre-emphasis affection
  • optimized modulation using Adaptive Spectral Processing
  • controlled from NEXUS

 

Version XJU-d01/2 (on request)

The d02 digital dynamics processor is a high-quality compressor/limiter/expander for dynamic processing of analog and digital audio signals in studio applications. The d02 is easy to operate and requires only a few user settings for achieving optimum results; all other parameters needed for accomplishing an inaudible dynamic processing are set and constantly optimized on the basis of the program signal. The processing results in a higher program density and loudness while the program stays free from coloring, pumping, breathing, distortion, or modulation effects.

  • digital compressor/limiter/expander
  • stereo or dual modes
  • controlled from NEXUS

 

 

Other Versions

Audio Data Packing and other Jünger modules on request

Power Dissipation

varying (depending on the implemented modules); typ. 4 W (incl. Jünger modules)

Dimensions

4 DU (1 slot), front panel detachable

    upward

Stage Tec Entwicklungsgesellschaft für professionelle Audiotechnik mbH, D-12459 Berlin, Tabbertstr. 10
Phone: +49 30 639902-0, Fax: +49 30 639902-32, , © 2002-2008 Stage Tec Berlin

Home / Company / Sitemap